| Sr.No. |
Test Paramter |
Test Standard |
Equipment(make) |
| 1. |
Mass per unit area |
ASTM D 5261 |
Balance (Mettler) |
| 2. |
Thickness |
ASTM |
Thickness tester |
| 3. |
Tensile strength (wide width) |
ASTM D 4595 |
UTM (Shimadzu) |
| 4. |
Grab test |
ASTM D 4632 |
UTM |
| 5. |
Trapezoid Tear Strength |
ASTM D 4533 |
UTM |
| 6. |
Index Puncture resistance test |
ASTM D 4833 |
UTM |
| 7. |
Water permeability |
ASTM D 4491 |
Water permeability tester (AIMIL) |
| 8. |
Cone Drop test |
BS EN 918 |
Cone drop tester |
| 9. |
Bursting strength test |
ASTM D 3786 |
B S tester |
| 10. |
Air permeability test |
ASTM D 737 |
AP Tester (texttocraft) |
| 11. |
Flame retardancy |
IS 11871 |
Vertical flammability tester |
| 12. |
Taber Abrasion |
ASTM D 3884 |
Abrasion tester (Taber) |
| 13. |
UV resistance |
ASTM D 4355 |
Q-Sun tester |
| 14. |
Water repellency |
IS 392 |
Bundesmann tester |
| 15. |
Water repellency |
IS 7016 part VII |
Hydrostatic Dome tester (SASMIRA) |
| 16. |
Seam strength |
|
UTM |
| 17. |
Resistance to Flexing Tester |
IS 7016 part IV |
Flexing Tester (Sehildknecht) |
| 18. |
Identification |
IS 667 |
Lab method |
| 19. |
Adhesion test |
IS 7016 |
UTM |
| 20. |
Resistance to extreme temperatures |
Visual observation |
|
